CEM I 52.5 R is a high-strength Portland cement for precast production and structural concrete that need rapid early strength development. It reaches a minimum compressive strength of 30 MPa at two days in standard mortar tests, making it a practical choice for precast beams, wall panels and prestressed girders where early demoulding matters.
CEM I 52.5 R is made primarily from Portland cement clinker, with calcium sulfate added to regulate setting. Under EN 197-1:2011, the 52.5 designation indicates a minimum 28-day compressive strength of 52.5 MPa, while R denotes high early strength, with a minimum of 30 MPa at two days. Both values are measured in standard mortar tests under EN 196-1. The product specification sets a minimum initial setting time of 45 minutes.
Precast manufacturers can use this grade for beams, wall panels and prestressed girders. Rapid strength development can help shorten mould turnaround once the concrete reaches the specified release strength. The grade also suits cast-in-place columns and slabs where the construction schedule calls for early formwork removal, subject to the strength achieved on site.
NCL Trading welcomes export enquiries for Vietnamese CEM I 52.5 R Portland cement. For a quotation, please share your required quantity, preferred packaging and destination port.
| Type | Portland Cement (Type I/II) |
| Compressive Strength | ≥ 42.5 MPa (28 days) |
| Fineness | ≤ 12% |
| Setting Time | Initial: ≥ 45 min | Final: ≤ 600 min |
| Bulk Density | 1.0 – 1.4 g/cm³ |
| Standard | TCVN 2682:2020, ASTM C150 |