Clinker Portland cement Type I is the main intermediate material used by cement grinding plants to produce Portland cement Type I. It is supplied in bulk and ground with gypsum to regulate the setting time of the finished cement. An SGS test sample recorded 62.17% tricalcium silicate (C₃S) and 0.88% free lime.
Clinker Portland cement Type I is a nodular material produced by heating a mixture of limestone and other mineral raw materials in a kiln. At cement grinding plants, clinker is milled with gypsum to produce Portland cement. Depending on the intended cement grade, it can also be ground or blended with constituents such as limestone, slag or fly ash.
SGS test report for a sampled bulk shipment recorded 62.17% tricalcium silicate (C₃S), 14.92% dicalcium silicate (C₂S), 8.59% tricalcium aluminate (C₃A) and 0.88% free lime. A cement sample prepared from the clinker and gypsum achieved a three-day compressive strength of 29.9 MPa under GB/T 17671-1999. The finished cement’s strength and setting characteristics depend on the grinding fineness, gypsum dosage and blend composition.
NCL Trading welcomes export enquiries for Vietnamese Portland cement clinker. For a quotation, please share your required quantity and destination port.
| Type | Portland Cement (Type I/II) |
| Standard | ASTM C150 |